CCNA Boot Camp Accelerated - CCNAX

CCNAX v2.0 is a course that merges the Interconnecting Cisco Network Devices Part 1 Version 2.0 (CICND1) and Interconnecting Cisco Network Devices Part 2 Version 2.0 (CICND2) courses. The first three modules of CCNAX (Building a Simple Network, Establishing Internet Connectivity, Managing Network Device Security) are mapped from ICND1 without modifications. The fourth module of CCNAX is Introducing IPv6, taken from ICND1 and adapted by removing OSPFv3 discussion and configuration. The fifth module in CCNAX is called Building a Medium-Sized Network and merges the ICND1 module of the same name and the ICND2 module Implementing Scalable Medium-Sized Switched Networks. Troubleshooting Basic Connectivity, the sixth module, is copied from ICND2. The next three modules, Wide-Area Networks, Implementing an EIGRP-Based Solution and Implementing a Scalable OSPF-Based Solution, take modules of the same name from ICND2 and merge them with few basic concepts that were introduced in ICND1. The last module, Network Device Management, is taken from ICND2. ICND1 Superlab, ICND2 Review Lab, and ICND2 Superlab are not included in CCNAX v2.0

Certification:

Candidates must book the 200-120 - CCNA Composite v2.0 separately. Should you fail your exam, you have the opportunity to re-attend the course again free of charge under the condition you bring your original manual to the course. You must take this free course within 6 months of attending the original course date

Target Audience:

Individuals seeking the Cisco CCNA® Routing and Switching certification. The course is also appropriate for pre-sales and post-sales network engineers involved in the installation and support ofenterprise branch office networks.

Key Job Tasks:

  • Configure: Implement the identified solution by applying the planned implementation processes using Cisco IOS commands and applications in the correct order to the selected devices and portions of the network.
  • Verify: Use the appropriate show and debug commands and applications to ensure that the solution was correctly implemented and is performing as desired.
  • Troubleshoot: Use the appropriate show and debug commands and applications to identify the cause of basic level network issues and correctly implement a solution that ensures the network is performing as desired.

Outline

Module 1: Building a Simple Network

Module Objective: Describe network fundamentals and build simple LANs

  • Lesson 1: Exploring the Functions of Networking
  • Lesson 2: Understanding the Host-to-Host Communications Model
  • Lesson 3: Introducing LANs
  • Lesson 4: Operating Cisco IOS Software
  • Lesson 5: Starting a Switch
  • Lab 1-1: Performing Switch Startup and Initial Configuration
  • Lesson 6: Understanding Ethernet and Switch Operation
  • Lesson 7: Troubleshooting Common Switch Media Issues
  • Lab 1-2: Troubleshooting Switch Media Issues
  • Lesson 8: Module Summary
  • Lesson 9: Module Self-Check

Module 2: Establishing Internet Connectivity

Module Objective: Establish Internet connectivity

  • Lesson 1: Understanding the TCP/IP Internet Layer
  • Lesson 2: Understanding IP Addressing and Subnets
  • Lesson 3: Understanding the TCP/IP Transport Layer
  • Lesson 4: Exploring the Functions of Routing
  • Lesson 5: Configuring a Cisco Router
  • Lab 2-1: Performing Initial Router Setup and Configuration
  • Lesson 6: Exploring the Packet Delivery Process
  • Lesson 7: Enabling Static Routing
  • Lesson 8: Managing Traffic Using ACLs
  • Lesson 9: Enabling Internet Connectivity
  • Lab 2-2: Connecting to the Internet
  • Lesson 10: Module Summary
  • Lesson 11: Module Self-Check

Module 3: Managing Network Device Security

Module Objective: Manage network device security

  • Lesson 1: Securing Administrative Access
  • Lab 3-1: Enhancing the Security of the Initial Configuration
  • Lesson 2: Implementing Device Hardening
  • Lab 3-2: Device Hardening
  • Lesson 3: Implementing Traffic Filtering with ACLs
  • Lab 3-3: Filtering Traffic with ACLs
  • Lesson 4: Module Summary
  • Lesson 5: Module Self-Check

Module 4: Introducing IPv6

Module Objective: Describe IPv6 basics

  • Lesson 1: Introducing Basic IPv6
  • Lab 4-1: Configure and Verify Basic IPv6
  • Lesson 2: Understanding IPv6
  • Lab 4-2: Configure and Verify Stateless Autoconfiguration
  • Lesson 3: Configuring IPv6 Routing
  • Lab 4-3: Configure and Verify IPv6 Routing
  • Lesson 4: Module Summary
  • Lesson 5: Module Self-Check

Module 5: Building a Medium-Sized Network

Module Objective: Implement and verify VLANs and trunking

  • Lesson 1: Implementing VLANs and Trunks
  • Lesson 2: Routing Between VLANs
  • Lab 5-1: Configuring Expanded Switched Networks
  • Lesson 3: Using a Cisco Network Device as a DHCP Server
  • Lab 5-2: Configuring DHCP Server
  • Lesson 4: Troubleshooting VLAN Connectivity
  • Lab 5-3: Troubleshooting VLANs and Trunks
  • Lesson 5: Building Redundant Switched Topologies
  • Lab 5-4: Optimizing STP
  • Lesson 6: Improving Redundant Switched Topologies with EtherChannel
  • Lab 5-5: Configuring EtherChannel
  • Lesson 7: Understanding Layer 3 Redundancy
  • Lesson 8: Module Summary
  • Lesson 9: Module Self-Check

Module 6: Troubleshooting Basic Connectivity

Module Objective: Troubleshoot IP connectivity

  • Lesson 1: Troubleshooting IPv4 Network Connectivity
  • Lab 6-1: Troubleshooting IP Connectivity
  • Lesson 2: Troubleshooting IPv6 Network Connectivity
  • Lesson 3: Module Summary
  • Lesson 4: Module Self-Check

Module 7: Wide Area Networks

Module Objective: Define characteristics, functions and components of a WAN

  • Lesson 1: Understanding WAN Technologies
  • Lesson 2: Configuring Serial Encapsulation
  • Lab 7-1: Configuring and Troubleshooting a Serial Connection
  • Lesson 3: Establishing a WAN Connection Using Frame Relay
  • Lab 7-2: Establishing a Frame Relay WAN
  • Lesson 4: Introducing VPN Solutions
  • Lesson 5: Configuring GRE Tunnels
  • Lab 7-3: Establishing a GRE Tunnel
  • Lesson 6: Module Summary
  • Lesson 7: Module Self-Check

Module 8: Implementing an EIGRP-Based Solution

Module Objective: Configure and troubleshoot EIGRP in an IPv4 environment, and configure EIGRP for IPv6

  • Lesson 1: Implementing EIGRP
  • Lab 8-1: Implementing EIGRP
  • Lesson 2: Troubleshooting EIGRP
  • Lab 8-2: Troubleshooting EIGRP
  • Lesson 3: Implementing EIGRP for IPv6
  • Lab 8-3: Implementing EIGRP for IPv6
  • Lesson 4: Module Summary
  • Lesson 5: Module Self-Check

Module 9: Implementing a Scalable OSPF-Based Solution

Module Objective: Configure, verify and troubleshoot multi-area OSPF

  • Lesson 1: Implementing OSPF
  • Lab 9-1: Implementing OSPF
  • Lesson 2: Multiarea OSPF IPv4 Implementation
  • Lab 9-2: Configuring Multiarea OSPF
  • Lesson 3: Troubleshooting Multiarea OSPF
  • Lab 9-3: Troubleshooting Multiarea OSPF
  • Lesson 4: Examining OSPFv3
  • Lab 9-4: Configuring OSPF for IPv6
  • Lesson 5: Module Summary
  • Lesson 6: Module Self-Check

Module 10: Network Device Management

Module Objective: Describe SNMP, syslog, and NetFlow, and manage Cisco device configurations, Cisco IOS images, and licenses

  • Lesson 1: Configuring Network Devices to Support Network Management Protocols
  • Lab 10-1: SNMP and Syslog Basic Configuration
  • Lab 10-2: Analyzing NetFlow Data
  • Lesson 2: Managing Cisco Devices
  • Lesson 3: Licensing
  • Lab 10-3: Managing Cisco Devices and Licensing
  • Lesson 4: Module Summary
  • Lesson 5: Module Self-Check
  • £ 2,275

    Guide Price Per Delegate

  • Dates & Locations Available

  • Leeds
    25/09/2017
    Leeds
    25/09/2017
    London
    25/09/2017
    London
    25/09/2017
    Glasgow
    09/10/2017
    Glasgow
    09/10/2017
    London
    23/10/2017
    London
    13/11/2017
    London
    13/11/2017
    London
    27/11/2017
    Birmingham
    11/12/2017
    Birmingham
    11/12/2017
    London
    05/02/2018
    Birmingham
    26/02/2018

Course Information

  • Due to the accelerated nature of this course it is expected that delegates will already possess existing experience working with Cisco Products and should have a strong existing familiarity with the concepts and products covered in the course.

  • Delegates without this existing experience should consider attending the Interconnecting Cisco Network Devices Part 1 Version 2.0 (CICND1) and Interconnecting Cisco Network Devices Part 2 Version 2.0 (CICND2) courses instead.

  • Describe network fundamentals and build simple LANs
  • Establish Internet connectivity
  • Manage network device security
  • Describe IPv6 basics
  • Troubleshoot VLAN issues, explain how STP works, configure EtherChannel, and understand the idea behind Layer 3 redundancy
  • Troubleshoot IP connectivity
  • Define the characteristics, functions, and components of a WAN
  • Configure and troubleshoot EIGRP in an IPv4 environment, and configure EIGRP for IPv6
  • Configure, verify, and troubleshoot multi-area OSPF
  • Describe SNMP, syslog and NetFlow, and manage Cisco device configurations, IOS images, and licenses

The CCNAX is an accelerated Boot Camp, which condenses 10 days of content into 5 days. As a result the start and finish times will be dependent on delegate skills/experience. Courses will start at 9am but may extend to 7pm.

Enquire about this course

Please leave this field blank: